DISPLAY STANDS FOR GLASS ART


Display Stand # 1
Large Table Stand for Glass Art


Dimensions: 11.75" W x 16" H x 6" D, .25” Square rod   
Delicate metal table stand designed to allow the glass art to be the focus and the stand inconspicuous.   Although delicate in appearance, the table stand is constructed of metal
and is quite sturdy. Perfect size for glass panels measuring 14”- 16” H and 20 - 22” W.

The leg supports raise the glass 2 & 3/8" off the ground and are only visible 7/8" above
the front of the glass. Stands have a matte powder coated finish -  a finish that is much
more durable than regular paint. 

Available $56



Display Stand # 2
Simple Table Stand

Dimensions: 10.75" W x 1.5 " H x 3.75" D, 3/8 " Gap for glass
Small glass panels display quite nicely since there is minimal obstruction of the glass
design by the stand.

Available $37.00 



Display Stand # 3
Cross Hatch Table Stand

Dimensions: 10” W x 1.5 “ H x 4” D, Gap for glass 1/2" W and 7/8" D, weighs 3.4 Pounds
Extraordinarily sturdy, yet sophisticated stand for panels up to !/2 " thick. 

Available $57



Display Stand # 4
Small Table Stand

Dimensions: 8.75”W x 9.25”H x 4.75”D. .25” Square rod
Delicate metal table stand designed to allow the glass art to be the focus and the stand inconspicuous. Perfect size for decorative glass art bowls measuring 13”- 16”  in diameter.

Available $54



Display Stand # 5
Display Stand for Glass Art Bowls - Large

Dimensions:  4.25 "H x 11.75" Diameter
Metal Display stand perfect for allowing a glass art bowl to be a table centerpiece.

Available $20



Display Stand # 6
Display Stand for Glass Art Bowls - Medium

Dimensions:  2.25 "H x 8" Diameter
Metal Display stand perfect for allowing a glass art bowl to be a table centerpiece.

Available $19



EDGE- GRIP WALL SCREW STAND-OFFS
Glass Edge-Gripping Hardware for Wall Hung Glass Art

Each Stand-Off Dimension: 1" H, .75" Diameter, max 1/4" gap for glass edge thickness
Each stand-off is shiny Gold Anodized metal. There is a partial open space in the middle
of the stand-off that allows the edge of the glass to be inserted only part-way in and then 
the stand-off is tightened around the glass to hold it in place. The stand-off screws into the 
wall with a screw that goes through the bottom of the stand-off and is not visible from the 
outside. Hardware includes anchors and screws for drywall. Uses 5/64 Hex wrench to
adjust the tightening screw.

Available $38 for a set of 3 (including anchors and screws for drywall) 


HELPFUL INFORMATION

See CONTACT page for information on Ordering. 

Shipping will be charged separately on Display Stands for glass art, since their weights and sizes vary so greatly, and they are not fabricated by the artist.